Tips for debugging a new small self-loading mixer truck

　　When having a new self-loading mixer truck, you can't wait to drive. But remember to debug it at first. Here are some tips.

　　Each component of the small mixer equipment must be reviewed after installation, and its manufacturing quality should meet the requirements of the drawing or specification.

　　After the various seals are installed, there is no lubricating oil leakage.

　　After installation, the deviation of the oscillation at the upper end of the agitation shaft of the small self-loading mixer truckis allowed tomeet the requirements. What's more, the small self-loading mixer truck must undergo operation with water as the medium and commissioning with loads of the mixing working medium.

　　Beforetrial operation, the equipment should operate stablywithoutabnormal vibration and noise. When water is used as the medium, the running time is not less than 2 hours;when itis runningwith load, the work time of the small self-loading mixer truck should be 4 hours, and in the rest situations,the time should not be less than 24 hours. In addition, beforecommissioning and normal operation, small self-loading mixer trucksare not allowed to run without load.

　　Under normal operating conditions, the temperature rise of the bearing shall is not higherthan 40℃. The maximum temperature must not exceed 80℃.

　　Daily maintenance is also important if you want to use the equipment for a long time. Common maintenance generally has the following points:

　　The well-used self-loading mixer truck needs to be cleaned in time.

　　The power supply needs to be cut off for routine maintenance or when not in use for a long time.

　　It is necessary to regularly check whether the oil in the oil tank is sufficient, and the shortage should be replenished in time.

　　For large-capacity and high-power engines with pulleys, regular check the degree of wear.

　　If there is an electrical fault, contact a professional for overhaul.

　　Check items regularly. Regularly check whether the smooth oil of each reduction box and each smooth part of the small self-loading mixer truck is sufficient. Regularly check the starting mixing motor of the self-loading mixer truck, and the rotation direction of the two half shafts should be the same as the direction indicated on the sign. If the direction is wrong, the power wiring should be changed.

　　If you want to know more about the small self-loading mixer truck, you can come to the website https://www.talenetmix.com/  for consultation or https://www.talenetmix.com/products/ to find your favorite.